Remote Control Training Vibration Sound Collar

Remote Control Training Vibration Sound Collar

150m REMOTE DOG TRAININGCOLLAR

2 Levels Micro static Vibration + Sound

 

 

I.     Preparation before using

1.    Make sure that batteries are installed in the remote controller and the receiver.

2.    The remote controller and the receiver of this set are automatically matched. When batteries are installed in the receiver, the receiver will make a sound. At that time you should press any button on the remote controller and the receiver will give three successive sounds. In this way the match is done and the remote control system can operate normally.

3.    If the receiver doesn’t give a sound when batteries are installed, please take out the batteries for more ten seconds and put them back and try again.

4.    Checking the remote controller: Press the buttons on the remote controller one by one and the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries. The battery cell of the remote controller is magnetic, for turning on the power of the receiver.

5.    Checking the receiver: The magnetic induction power switch being installed in the remote controller, when move the magnetic part of the remote controller close to the indicator light side of the receiver the indicator light will light, meaning the power is turned on. Another closing up of this will turn off the power while the indicator light goes off.

6.    When batteries are first installed in the receiver, the circuit will be automatically turned on. After it is closed by magnetic force, it can be open by magnetic force too. If the batteries are taken out and reinstalled, the circuit will be turned on.

7.    Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.

8. Press the vibration buttons on the remote controller and the receiver will make vibration.

9.    Press the Sound button on the receiver will make the “B-B” sound. You can train the pet to take your orders by different tempos. Every order must have a fixed tempo. An insisting training will bring you a wonderful effect. For example, three “B-B” sounds mean “coming back”.

10. The high frequency vibration of the collar is to curb the improper deeds of the pet. After each successful check, you should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like.

11.Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.

II.   Operational instructions:

1     Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert a finger in between.

2.    Most pets feel uncomfortable at first wearing the collar. Don’t use the vibration function at that time until you are sure that the pet has gotten used to the collar. The high frequency vibration is used to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.

3.    You can also use the “B-B” sound to convey your orders.

4.    You can turn off or turn on the power of the receiver by the magnetic part of the remote controller.

5.    If you don’t use this product, take the collar and receiver off the pet and turn off the power, so as to prolong the lifetime of the batteries.

6.    If you don’t use the collar receiver for a long time, take out the batteries.

Remote Control Training Vibration Sound Collar